Results 1 to 10 of 27
Thread: Tower Camera Mod
-
02-13-2012, 04:07 PM #1
Tower Camera Mod
Does anyone know the diameter of the tow pylon on the tower?
David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
02-13-2012, 04:53 PM #2
At what point? I have the boat right outside in the garage.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
02-13-2012, 05:42 PM #3
So what's the MOD?
Kraig - 2010 Outback V
-
02-13-2012, 10:30 PM #4
Kane, the widest point, not the plastic narrow spot where the rope attaches
David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
02-13-2012, 11:19 PM #5
David, I tried to get a pic of it with the tape measure but it didn't work out too well. Here's the efforts so you know what part I measured. When I put the phone (camera) down and started from the 1" mark instead of the crappy end hook, I accurately measured 1 7/8".
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
02-13-2012, 11:26 PM #6
Oh crap, you said "widest point". I forgot how to read, I guess. Gimme a minute.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
02-13-2012, 11:30 PM #7
OK, the widest part of the metal is the "cap" on top and it measures 2 1/2". But, the plastic rope saver swivel ends, not the middle part but the spool ends if you will are slightly wider so they measure about 1/16" more. If I had to slip something over the top of the whole thing it would need to be about 2 9/16", at least on mine.
You can see it in the pic I blew up above. Look how the white plastic protrudes beyond the metal a little bit. I hope this helps.
Edit: Actually the very top of the first pic shows it the best.Last edited by kaneboats; 02-14-2012 at 11:39 AM.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
02-14-2012, 12:46 AM #8
2 5/16 or 2 9/16? If the top cap is 2 1/2 and the plastic sticks out another 1/16 inch I would think 2 9/16 or 2 5/8
David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
-
02-14-2012, 11:40 AM #9
What are you talking about? I said 2 9/16". Check for yourself. But, you are right. 2 5/8" would be safe to allow for it on both sides if you were slipping something over the top.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
-
02-14-2012, 03:58 PM #10
Now the issue is I don't think they sell 2 5/8 PVC. May have to try a collar for 2 1/2 and see I that will slide over
David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD