Put your boat model and year in your sig!

**cab13367** · 05-30-2011, 07:18 PM

Time for another reminder to PLEASE put your boat model and year in your signature. We have many new members asking questions which is great but we need to know your boat model and year at a minimum. If you have an engine related issue, please state which engine you have and if it's carb or FI.

Mods, can we sticky this for a while?

Thanks!

Al

**jstenger** · 05-30-2011, 11:19 PM

I would like to, but I do not know how. Is there a thread showing how? Thanks

**cab13367** · 05-30-2011, 11:34 PM

Originally Posted by jstenger

I would like to, but I do not know how. Is there a thread showing how? Thanks

Click on "User CP" on the far left side of the menu bar above, then under "Settings and Options" on the left navigation pane, click on "Edit Signature".

**brain_rinse** · 05-30-2011, 11:46 PM

Stuck. Good reminder, Al. Thanks!

**rdlangston13** · 06-02-2011, 01:59 PM

From looking at everyones signature on here with their boat year make and model it seems like 2008 was very good year for the LSV sales wise. Why does so many people have a 2008 LSV on here over any other year or model? Did SC or Moomba make a lot of really good deals that year or do more promotion than normal?

**kaneboats** · 06-02-2011, 02:38 PM

Hull change was in 2006. Word got around. Outstanding value. They built a lot of them.

**cab13367** · 06-02-2011, 02:46 PM

Originally Posted by kaneboats

Hull change was in 2006. Word got around. Outstanding value. They built a lot of them.

Wasn't the 2009 Moomba LSV the highest selling model wakeboard boat on the market? Or was that 2010? Doesn't answer the question why the 2008's are so popular on the board though

**kaneboats** · 06-02-2011, 02:53 PM

All I know is I rode in Moombadaze's a couple times and had to get one.

**rdlangston13** · 06-02-2011, 04:49 PM

the only thing i dont like about our hulls is how the lowest point in the hull is in the middle of the boat and the only drain is in the very back. i have no seen any other manufacturer do that and i wonder what the benefit is of this design as i can see alot of negatives like the water being trapped in that section...

**moombadaze** · 06-02-2011, 07:47 PM

mis design that got corrected,"they" dont allways get everthing right the first time, but in general did a great job

not sure who "they" is but there sure are a lot of them

Thread: Put your boat model and year in your sig!

Thread Tools

Display

Put your boat model and year in your sig!

Posting Permissions