Steering wheel

[jmvotto]

Anybody know if this will fit our moombas?

http://cgi.ebay.com/ebaymotors/Folle...r#ht_595wt_722

[jmvotto]

anyone know if the extra diameter would be a problem?

first one ( looks like the moomba wheel) anyone know the manufacturer.
13.78" Wheel Diameter
3/4" Tapered Hub
Aluminum Spoke


second two
14.18" Wheel Diameter
3/4" Tapered Hub
Aluminum Spoke

[jmvotto]

Bueller???? anyone Bueller

[dusty2221]

Go for it, then report back!

Sometimes it's fun to be the guinea pig!

[kaneboats]

Did you try calling them to ask what it fits?

I think Todd (11OutbackV) replaced his wheel with that blue thing. He may have some insight. The only other one I remember was Sled, but he just went to a Supra wheel so it's the same.

[c.rix]

Did you try calling them to ask what it fits?

I think Todd (11OutbackV) replaced his wheel with that blue thing. He may have some insight. The only other one I remember was Sled, but he just went to a Supra wheel so it's the same.

sled

[jmvotto]

sled

poor sled, we miss him..
probably watching periodically from a far.

Razz and cab did the same thing upgraded to the supra. Is this the same company that makes the moomba SW?

[11 Outback V]

MOST aftermarket steering wheels come w an adapter that should work with what you have. My adapter worked and all I had to get was shorter bolts to make it work. Other than that it was a direct replacement.

[Razzman]

Our steering wheels have the marine spline setup, not the automotive taper fit. You'll need a splined adapter to do it, that is as long as the hole pattern on the wheel matches up to the holes on the splined adapter. There are many different hole patterns so make ABSOLUTELY sure the patterns are the same.

[Razzman]

Another thing, 14" is a big wheel and when lowered into position might hit your leg, etc. Personally I wouldn't go bigger than 13".