




Anybody know if this will fit our moombas?
http://cgi.ebay.com/ebaymotors/Folle...r#ht_595wt_722
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
anyone know if the extra diameter would be a problem?
first one ( looks like the moomba wheel) anyone know the manufacturer.
13.78" Wheel Diameter
3/4" Tapered Hub
Aluminum Spoke
second two
14.18" Wheel Diameter
3/4" Tapered Hub
Aluminum Spoke
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
Bueller???? anyone Bueller![]()
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
Go for it, then report back!
Sometimes it's fun to be the guinea pig!
Did you try calling them to ask what it fits?
I think Todd (11OutbackV) replaced his wheel with that blue thing. He may have some insight. The only other one I remember was Sled, but he just went to a Supra wheel so it's the same.
My Mom said I'm not allowed to get wet!
2008 LSV (sold)
2000 Outback LS (sold)
LLTR!!!!!!!!
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
MOST aftermarket steering wheels come w an adapter that should work with what you have. My adapter worked and all I had to get was shorter bolts to make it work. Other than that it was a direct replacement.
REALLY????
Our steering wheels have the marine spline setup, not the automotive taper fit. You'll need a splined adapter to do it, that is as long as the hole pattern on the wheel matches up to the holes on the splined adapter. There are many different hole patterns so make ABSOLUTELY sure the patterns are the same.
2007 Mobius LSV
Another thing, 14" is a big wheel and when lowered into position might hit your leg, etc. Personally I wouldn't go bigger than 13".
2007 Mobius LSV