Here is a picture taken from inside the locker looking to the bow. The spot right below the retangular white box (which has some really small printing as I was attempting to add a text box) is where the locker floor mates up with the hull. Right there is where there is a gap because it's not sealed to the hull. When a cup of water is poured in there, it seeps down to where the hole was cut in the locker floor in the first post of this thread. I'm not sure what that means regarding where the stringers are, but I guess that tells me that the water should all drain/seep down to that hole that is cut in the locker floor. We are still waiting for the dang thing to dry out. I'll be heading up to the shop tomorrow to take more pictures and check on progress.