Results 1 to 8 of 8
  1. #1
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    2,264

    Default Part Numbers,Specifications Torques Etc

    This list can/will be updated as these are identified, I take no responsibility for the accuracy of this report please feel free to add part numbers as you know as well


    Indmar engine owners manual ftp://ftp2.indmar.us/Manuals/Operato...s Manual.pdf

    Indmar repair manual http://www.bakesonline.com/images/MediaLibrary/Indmar_5.7RepairSpecs.pdf

    Other manuals http://www.bakesonline.com/boatinfo.aspx
    Oil Filters for 5.7L
    ----------------
    AC/Delco PF25
    Castrol CM30
    Mobil M1- 302
    Fram PH30 PH5 also
    Napa 1069
    Pennzoil PZ3
    Penske PN30
    Purolator L20049
    Motorcraft FL10
    Quaker State QS30
    WIX 51069

    Fuel Pump high pressure CARTER P61171 ?
    low pressure, Indmar 501006 low pressure pump is LITERALLY a Carter P4594 (or a P4389) ?

    We installed the thermostat housing dry ... no RTV on the gaskets. The two larger bolts are torqued to 31 foot pounds and the smaller one to 17 foot pounds. (From indmar Larry)

    Prop nut torque 30-35 ftlbs
    Prop Nut size 1 1/16" for 1 1/8" shafts 1" ? for 1" shafts ?
    spark plug 11 ftlbs
    shaft coupler bolts 25-30 ftlbs
    Exhaust Manifold Bolt Torque - 18 to 24 ft-lbs
    Exhaust Riser Bolt Torque - 18 to 22 ft-lbs

    Spark plugs
    If your engine dose not have catalytic converter exhaust, I would recommend using conventional AC/Delco MR43LTS plugs gapped at .045.. Any catalyst engines should use platinum or iridium plugs. The plugs we used in the cat 5.7L engines have superseded to 41-101 gapped at .040. "Engine Nut"

    impeller Johnson 812 b
    inline fuel filter Napa 3299 Carquest 86299
    1/4- 1/2" play on v and serpentine belts
    bilge pump Atwood Sahara model S500.

    starter parts solenoid for the 4 wire PG260 starter.

    Transmission mount bushings rubber 536004. Inboard online $8.61
    here are the spark plugs

    http://www.summitracing.com/parts/ACF-41-101/ for 340 ext/cat engines
    http://www.summitracing.com/parts/ACF-MR43LTS/ for mpfi, carbed engines

    Thermostat. The subsitute part number for the S985009 is Sierra part number 18-3649. The cost is $41 vs $19, respectively.
    Last edited by DOCDRS; 10-08-2018 at 06:08 PM. Reason: engine nut spark plugs

  2. #2
    Join Date
    Jul 2008
    Location
    Des Moines, IA
    Posts
    3,237

    Default

    Another option for spark plugs on the 325 engines. Stock many came with AC 41-993 Platinums (gapped at .060), but these have been replaced by AC 41-101 Iridium (also gapped at .060)

  3. #3
    Join Date
    Jul 2009
    Location
    Spokane, WA
    Posts
    503

    Default

    Exhaust Manifold Bolt Torque - 18 to 24 ft-lbs

    Exhaust Riser Bolt Torque - 18 to 22 ft-lbs
    2015 Supra SC400
    08 LSV - Sold
    Go big, or go home.

  4. #4
    Join Date
    Apr 2011
    Location
    Red Mountain
    Posts
    67

    Default

    Another option on oil filters is the K&N HP2002. A well made filter and a bit deeper (more volume?). Also, the hex nut top is very handy for removal.
    07 Outback V

    Replicants are like any other machine - they're either a benefit or a hazard. If they're a benefit, it's not my problem.

  5. #5
    Join Date
    Jun 2008
    Location
    Eugene OR
    Posts
    1,786

    Default

    Just something to note on the spark plugs's. The 08 Manual calles for an AC 41-932. This part has been replaced with the AC 41-993.
    2008 Outback V - Sold but never forgotten.
    “Do not wait; the time will never be “just right.” Start where you stand, and work with whatever tools you may have at your command, and better tools will be found as you go along." -Napoleon Hill

  6. #6
    Join Date
    Apr 2012
    Location
    Quebec, Canada
    Posts
    59

    Default

    Quote Originally Posted by brain_rinse View Post
    Another option for spark plugs on the 325 engines. Stock many came with AC 41-993 Platinums (gapped at .060), but these have been replaced by AC 41-101 Iridium (also gapped at .060)
    My manual says that the gap should be 0.040 in. Do I have to change the gap of the ac 41-101 or just let it to 0.06?
    Mobius LSV 2011
    GIII, V2 Tower, Indmar 325,

  7. #7
    Join Date
    Jan 2008
    Location
    Tallahassee, FL
    Posts
    14,071

    Default

    Thermostat IND985009 or S985009 (160 degree)
    Gasket S551004
    My Mom said I'm not allowed to get wet!
    2008 LSV (sold)
    2000 Outback LS (sold)
    LLTR!!!!!!!!



  8. #8
    Join Date
    Jul 2002
    Location
    London Ontario Canada
    Posts
    2,264

    Default

    Transmission Specs


    Indmar Shop Manual has the following:
    Flywheel to crank bolt - Use loctite 271 on threads
    On 5.0 and 5.7 models with two-piece rear main seal 70 ft-lb
    On 5.0 and 5.7 models with a one piece rear main seal 75 ft-lb
    7.4L and 8.2L 65 ft-lb
    8.1L 74 ft-lb

    Damper Plate - 35 ft-lb

    In all cases tighten bolts in a crossing pattern
    09 21v LAUNCH

    99 Outback LS. Sold


    run your engine after you change your oil
    68 th Member. WS420,HSE Revolution, OJ 466, Acme1157,1100 sacs,Kicker HLCD's n IX500.4, Supra Coolies
    Doug

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •