




Do any of you put Loctite on the bolts to your bindings? If so what color do you use? I bought some blue and noticed (after I got home) that it was Permatex® Surface Insensitive Threadlocker BLUE and had a breakaway at 180 psi. I know this stuff will not work for what I need.
Having 2 bolts that would not stay tight I used blue locktite on them. Has worked out well.
Frank
I would be careful deciding on which "Locktite" to use based on color because Locktite is the name of a company and there are several companies making threadlockers and the bottles look alike. LockTite makes several types of thread lockers so I would suggest you visit their website.
http://www.loctiteproducts.com/produ...id=48&plid=153
After looking at the loctite products you could go either blue or green.
I put blue loctite on mine. Ain’t got time to be tightening them suckers down every outing.
Sent from my iPhone using Tapatalk
David
2017 Moomba Mojo Max Surf Edition, 2 Pair Wetsounds Rev10s powered by an SD2, 6 pair Wetsounds XS650M and Wetsounds XS12 powered by SD6 all controlled by a WS420. 2 Lumitec SeaBlaze X2 Spectrum underwater lights
SOLD***2008 Mobius LSV, Gravity III , Wake Plate, Z5, Exile SX65c's, Exile XM9s, Exile XI12D, Exile Javelin, Exile 30.2***SOLD
The content is produced for the aid of the students. The wise use of the product and great essay writers are implemented for individuals. The reflation is inquired for the fulfillment of the goals for the humans.
I use blue loctite on my snowboard bindings.
2019 - Makai took delivery
2018 Yamaha AR195 SOLD