Results 1 to 5 of 5
Thread: Help Wiring Lift Motor to Switch
-
03-20-2010, 08:31 PM #1Member
- Join Date
- Apr 2007
- Posts
- 61
Help Wiring Lift Motor to Switch
I am putting in a new lift and was given a used Magnetek 3/4 hp motor and switch to use to raise boat up and down. I have searched for a wiring diagram and can't seem to find one. The motor has 6 wires coming from it. White, Black, Red, Blue, Orange & Yellow.
The switch has 5 wires. White, Black, Red, Orange, and Green. I tried matching colors and the motor would only run in one direction. What is the correct way to wire it up?
-
03-20-2010, 10:15 PM #2
There may be someone familar with this motor that may help. Can you provide the information on the motor label plate?
1998 Mobius
310 HP PCM
SOLD
-
03-20-2010, 11:40 PM #3
the folks at Lunmar helped me when I wired up mine. here is a link to the wiring diagram and their phone number is on the top right
http://www.lunmarboatlifts.com/index...lay/page_ID/21
-
03-21-2010, 09:33 AM #4Member
- Join Date
- Apr 2007
- Posts
- 61
Here are some pics of the motor and switch. I know the switch is wired correct because it came off a working lift. So the question is related to wiring it to motor
-
03-21-2010, 09:36 AM #5Member
- Join Date
- Apr 2007
- Posts
- 61
Here are a few more pics. And the last one is for the guys up north that doesn't belive that it snows in Texas, in FREAKING March