Vinyl care recommendations from the manufacturer

[Razzman]

Well after doing some research it seems that Fantastik had re-formulated their cleaner a few years back and it's now safe to use, so i stand corrected.

[you da man]

everyone on Wakeworld raves about Malco. Is Malco friendly to Moomba vinyl?

[Razzman]

It's freindly to all vinyl, Malco has been making it for years it turns out and been supplying the auto detail industry for at least 20. I talked to a Malco rep at the facility and he said it's also been used on boats for awhile as well.

You do have to be careful with it and I rinse with water right after and only use it when neccessary. I instructions state "do not let run, wipe drips immediately". It does however restore dirty vinyl and thread to as new condition. I also checked the contents to make sure there was nothing harmful in it.

[you da man]

It's freindly to all vinyl, Malco has been making it for years it turns out and been supplying the auto detail industry for at least 20. I talked to a Malco rep at the facility and he said it's also been used on boats for awhile as well.

You do have to be careful with it and I rinse with water right after and only use it when neccessary. I instructions state "do not let run, wipe drips immediately". It does however restore dirty vinyl and thread to as new condition. I also checked the contents to make sure there was nothing harmful in it.

I planned on using the Malco a few times per year for a "good" cleaning. Then maybe use Babe's Seat Soap followed by 303 for general cleaning.