Results 1 to 10 of 15
Hybrid View
-
07-01-2009, 01:51 PM #1
-
07-14-2009, 12:26 PM #2
Just one update... the hinges came pre-drilled with only three screws per side, and I was worried about the stress if someone were to lean on an open seat. I drilled a few more holes, added some screws, and sleep a lot better now.
-
07-16-2009, 05:37 PM #3Senior Member
- Join Date
- Aug 2008
- Location
- Cottage Grove, MN
- Posts
- 780
are the screws self tapping on the cushion side of the hinge? and for the fiberglass side of the hinge, did you use nuts on the underside or just screws that hold in the fiberglass. Very cool idea, I will be copying this.
-
07-19-2009, 10:32 PM #4
I pre-drilled both the fiberglass and the seat bases, then used #10 x 3/4" stainless screws on both sides. Good luck!
-
07-25-2009, 04:44 PM #5
-
07-26-2009, 06:15 PM #6
-
07-29-2009, 08:56 PM #7
Mine hinges are now installed. They work well.
2008 Mobius LSV Blue and Black.