Quote Originally Posted by jmvotto View Post
I think I have 10 cup holders 07 OBv. this may solve the additional interior lighting i was thinking of adding.

Ian did you have to drill a larger Hole?
Did you mount from the bottom with adhesive or pull from the top?

Will the cup holder stiller drain or do you need an additional drain holder form those foamy beverages?

great job
I dropped the lights through the top, I didn't have to drill out the hole to make it larger. I put a piece of heat shrink tubing around the wires and zip tied it on the bottom of the cup holder, I did this for 2 reasons: 1-to protect the wires from chaffing on the bare metal of cupholder, 2-to secure the LEDs inplace. I did't glue them, so they have a bit of movement; the thought is that this will allow them to still drain properly, although I didn't 'test' it.

I'll try to snap some 'bottom' side pics of how I did it to give you a better idea.