Results 1 to 10 of 11
Thread: Boatmate trailer
-
02-27-2009, 12:27 AM #1
Boatmate trailer
Anyone know the inside dimension for the bow roller (between the metal uprights)for an 07 single axle boatmate. Is it 3.5" or 4" ? Mine is in storage so i can't look until may. I want to put a poly roller on it.
Thanks in advanceA Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
02-27-2009, 12:36 AM #2
I changed mine last summer and I believe it's 3". I know it's not 4".
07 Mobius LS--Razorback Red
-
02-27-2009, 12:51 AM #3
Seark,
Thanks, 4" seams a little wide probably for bigger boatsA Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
02-27-2009, 12:55 AM #4Junior Member
- Join Date
- Oct 2008
- Location
- Bozeman Montana
- Posts
- 15
Just measured mine. 2007 OBV, boatmate single axle trailer. 3.25" inside of plate to inside of plate.
-
02-27-2009, 08:05 AM #5
montana, thanks for the actual measurement. so 1/8" play on either side.for the 3" poly
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
02-27-2009, 08:18 AM #6
jm, have you thought about getting a boat buddie instead of the roller?
Hey, Its Moomba time
Its all about the dash - enjoy the dash, as that is your time between the dates
13 Mobius LSV-sold
08 Mobius LSV-sold
03 Mobius LSV-sold
life is about finding the balance between being a responsible adult and staying young at heart
-
03-01-2009, 05:46 PM #7
Not really, the boat goes off and on the trailer about twice a year then sits in our lift after that. i just don't want to clean the black marks every year off the bow roller,therefore the poly roller.
A Day at the Lake...Priceless
A Day in Powder...Endless
Joe V
2012 Möbius XLV~ Loaded & Exiled
2007 Outback V ~ sold
-
03-01-2009, 06:16 PM #8
It's the segmented 3" roller, replaceed mine last year.
2007 Mobius LSV
-
03-01-2009, 10:26 PM #9
had to replace mine too.. the factory one ate up the gelcoat around the bow eye when it gave up and let the bolt inside rub against the bow! WOW>> THANKS.
Brad
2011 Launch 21V Sold... boatless replaced with a Jeep JKUR
2006 Moomba Mobius LSV sold
2004 Outback sold
-
03-02-2009, 07:15 PM #10Member
- Join Date
- Jun 2006
- Location
- Edmonton, AB, Canada
- Posts
- 60
Hey Razzman.
Where did you get that roller from?
I really like it.
Cheers