And lastly I've used one of the unused drain ports on the front ballast bag and made a new overflow that feeds my integrated bow sack (ok not really ibs, but it will work for now).





And installed a new separate discharge pump that will eventually feed out right next to the factory floor ballast discharge.



I have yet to water test yet so we will see what happens. Worst case I'll have to upgrade to a 1" thru-hull for water supply. But at 10 gallons a minute each pumps should feed fine through 3/4 since 30gpm is reccomended max flow through 3/4 pipe, plus its shuch a short shared route I don't think I'll have problems.

Newty