Results 1 to 10 of 74

Threaded View

  1. 06-10-2024, 07:29 PM #7
    Dukabor's Avatar
    Dukabor
    Dukabor is offline Senior Member
    Join Date
    Jul 2022
    Location
    Alberta/BC
    Posts
    180

    Default

    Prepping for the season and was going for another upgrade to the stiffening of the engine panels….. have a look at what the panels look like before I stiffen up the lower portion….




    Will be drilling and bolting the existing angle iron through the panel as well as running some additional angle iron perpendicular to the existing and parallel to, and as close to the channel where the panel sits on the bottom

    Sent from my iPad using Tapatalk
    Last edited by Dukabor; 06-10-2024 at 07:31 PM.
    2022 Makai
    Fire Red - Pecan ChillTech - Woodgrain Gatorstep - 5% tint - Shoreline Shade
    400 - 1.76 - Acme 3409 16x13 prop (15.5x15 Altitude/Wake spare) prop
    Ballast Mods: (aka TINRFD): 1500lb of lead (you read that right) and +700lb WM Bags
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules