Page 8 of 8 FirstFirst ... 678
Results 71 to 76 of 76

Thread: Bimini

  1. #71
    Join Date
    Jun 2008
    Location
    Henderson, NV
    Posts
    7,044

    Default

    I towed for years from the sides of our old '06 supra and that roswell tower squeaked and groaned occasionally...

    as knox mentioned, had to tighten bolts a few times and did notice it caused one of the pads on the top deck to slide out of position but tower took it like a champ.....
    '06 Supra Launch 20SSV-gone but never forgotten

  2. #72
    Join Date
    May 2018
    Posts
    4,939

    Default

    Thanks for the reminder on checking/tightening tower bolts.


    Sent from my iPhone using Tapatalk
    2021 Supra SA 400
    2018 Supra SA 400 (SOLD)
    Michigan

  3. #73
    Join Date
    Jul 2022
    Location
    Alberta/BC
    Posts
    146

    Default

    Picked up the Shoreline Bimini today….

    My dealer ordered in a few and had set one up on a Mojo in the showroom and I snapped a couple pictures…

    I really like the setup (and the price compared to other options) and there is a lot of adjustability on how you can mount it, both with the ability to flip the mounts higher or lower (and rotate on the tower up or down) as well as the ability to angle the poles outward or inward depending on how you mount… I know that’s probably not the best description but when I mount I will try to help it make more sense….

    Took some adjustment to close the gap between the rear of the existing Bimini and the shade, and I am really impressed with its size, i knew how long it was yes, but the fact that it could reach to the rear of the deck of the Mojo was great to see…

    Glad for the additional length on my Makai as I can extend it fully and still allow someone to step right up onto the transom before having the potentially bend down under the shade (of course it does not have to extend that far, but if you do not extend it out you need to adjust for the slack in the fabric)

    For a universal fit design I give them big props for the design and I have a few additional ideas on what I may do to mount it for my purposes!

    Ok here are a few pics from the showroom




    Sent from my iPad using Tapatalk
    2022 Makai
    Fire Red - Pecan ChillTech - Woodgrain Gatorstep - 5% tint
    400 - 1.76 - Acme 3409 16x13 prop (15.5x15 Altitude/Wake spare) prop
    Ballast Mods: (aka TINRFD): 1000lb of lead and +700lb WM Bags (500lbs of more lead coming soon)

  4. #74
    Join Date
    Jul 2022
    Location
    Alberta/BC
    Posts
    146

    Default

    Second pic




    Sent from my iPad using Tapatalk
    2022 Makai
    Fire Red - Pecan ChillTech - Woodgrain Gatorstep - 5% tint
    400 - 1.76 - Acme 3409 16x13 prop (15.5x15 Altitude/Wake spare) prop
    Ballast Mods: (aka TINRFD): 1000lb of lead and +700lb WM Bags (500lbs of more lead coming soon)

  5. #75
    Join Date
    Jul 2022
    Location
    Alberta/BC
    Posts
    146

    Default

    And third pic (one at a time per Tapatalk free because I spend all my $$ on the boat)




    Sent from my iPad using Tapatalk
    2022 Makai
    Fire Red - Pecan ChillTech - Woodgrain Gatorstep - 5% tint
    400 - 1.76 - Acme 3409 16x13 prop (15.5x15 Altitude/Wake spare) prop
    Ballast Mods: (aka TINRFD): 1000lb of lead and +700lb WM Bags (500lbs of more lead coming soon)

  6. #76
    Join Date
    Mar 2021
    Location
    South Georgia
    Posts
    1,989

    Default

    I like that. Definitely want to see it on your Makai!

    Sent from my SM-G781V using Tapatalk
    2021 Moomba Makai
    Black Cherry Metal Flake & Fire Red
    Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
    Wet Sounds bow speakers & 10's on the Tower & ported sub

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •