Quote Originally Posted by HFarr View Post
Man as a last resort. Take those screws out and put some large fender washers over the plastic on the outside of the mount and put it back. 3 may hold it in place pertty well. All the force when in use will be pushing into the transom and not pulling away.

Sent from my SM-G781V using Tapatalk
Well we’ve been on the water every day since Saturday so it may be a nice little break. If it were Sunday and this was the only option I may do that.

The hole where the cable passes through is sealed by a small rubber grommet that compresses between the actuator bracket and the transom.


Sent from my iPhone using Tapatalk