I noticed that some small pieces of our 2021 Mojo flooring are coming loose. What is the best way to reattach? You can see the middle of the "O" and a corner of the "M" on the photo. TIA
Moomba floor.jpg
2021 Mojo
Get it replaced under warranty
Sent from my iPhone using Tapatalk
2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
Some waterproof gorilla crazy glue or contact cement should work easily on that. But I would keep an eye out for any other areas. Could be a bad batch of material.
Sent from my SM-G781V using Tapatalk
2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
what is the warranty time for the flooring?
thanks.
2021 Mojo
if it's warranty, dealer repair off-season. if it's not, epoxy and call it a day.
sometimes I hated to bother the dealer with small stuff that, frankly, could be made decent with some 2part epoxy but if it gets worse I'd hate to be in the "you fixed it so it's not warranty anymore" camp.
'06 Supra Launch 20SSV-gone but never forgotten
Super glue.
Starbond or similar.
IMO not worth dicking with a warranty claim, they are more likely to screw something else up in the process.
2 minute fix with 5 dollars of super glue.
2020 Supra SA
3M adhesive spray works great.
Scott
2021 Craz
2007 Mobius LSV
1997 Sea Ray 190
If you are getting bubbles, I went to Home Depot and bought a syringe used for marinades. I filled it with Gorilla glue and injected it into the bubble then put a weight on it. Seems to have worked pretty well
Moomba Craz ‘21
Barefoot Nautique ‘91 (traded-in)