Note from Indmar - CHANGE YOUR OIL!

[JimLevin]

Got a question on the filter and refill process for a Raptor Indmar 6.2L 2019 Makai. For the cartridge oil filter type, when you guys put your new oil filter back in, do you pour some new oil into the oil filter canister before inserting the new oil filter? (I am not talking about a spin-on type filter, I mean specifically the cartridge (https://inboardonline.com/6-2l-rapto...ct-description) type, similar to a Toyota sequoia.) I saw a video where a guy changed his oil and did this, poured in some oil to the canister before putting the new filter in and putting the top back on. I was under the impression the oil would just drain out of the filter canister back to the oil pan if you did this. I’ve already refilled the new oil to the top line of the dipstick and would not want to pour more oil into the filter canister, just to have it drain back to the oil pan and sump. Thoughts? AND where do yall place the new rubber o-ring, at the very base or on the last rib of the canister top? Note what I mean is, see how the white ring is in this photo of the canister top, located at the top ‘rib’ of the threads instead of at the very edge of the canister top https://inboardonline.com/501023-cap...-6-2l-5011023/ Asking b/c I always move it to the very top of the canister, am I wrong and the photo correct?