Question on Bimini Part

[Wren]

So are you saying the ball eroded away from the pin, is it this?

Sent from my SM-G781V using Tapatalk

No. The actual piece lost some of it's metal so now the ball will not stay on place. It will slide back and pin in but then comes out with wind/bounce.

Sent from my Pixel 6 Pro using Tapatalk

[Wren]

If I am not mistaken, Roswell makes the bimini. I would just call them directly. That might be the quickest easiest way to get replacement.

Sent from my SM-G975U1 using Tapatalk

Good idea. Thanks.

Sent from my Pixel 6 Pro using Tapatalk

[Mxmark4]

Be advised Roswell charges some rediculously expensive prices for all their parts. If you are handy and willing to look around you can probably save a good bit of coin on that small part biying anywhere other than from Roswell.

[Mxmark4]

Measure your tube but this one fits 7/8 tube https://tacomarine.com/canvas-shade-ball-socket-top-fittings-f13-0242

[Wren]

Be advised Roswell charges some rediculously expensive prices for all their parts. If you are handy and willing to look around you can probably save a good bit of coin on that small part biying anywhere other than from Roswell.

That's what I was noticing on the Roswell site. I didn't see the specific part online but the stuff I saw was outrageously priced.

Sent from my Pixel 6 Pro using Tapatalk

[Wren]

Measure your tube but this one fits 7/8 tube https://tacomarine.com/canvas-shade-...tings-f13-0242

That's the one I saw as well. I'll have to get into the boat tomorrow to double check on measurements. Thanks Mark

Sent from my Pixel 6 Pro using Tapatalk

[Wren]

Just wanted to say thanks for the help. I got it figured out. Called Roswell and the price with shipping is $44.17. Which is actually less than what tacomarine was charging with shipping... $47. So it's out there... The part is a Bimini deck hinge - part number C717-5190.

Sent from my Pixel 6 Pro using Tapatalk