Results 1 to 10 of 72

Threaded View

  1. #27
    Join Date
    Oct 2018
    Location
    Hockley, Tx
    Posts
    1,013

    Default

    Quote Originally Posted by Hayden View Post
    I like that AW identifies where you need to move weight/people to achieve your pitch/roll values but I dislike that it will empty ballast to achieve that. I want the boat at 100% of it's possible displacement always and then I will manually move people or leadbags based on it's recommendations.
    While I think we all agree that we want to keep our boats as heavy as possible while we surf I personally don't have the time or the patience to move lead or ask people to sit here or there. We always have a decent crew of 8 on the boat so people are all over and their added weight negates any ballast draining to me. When Ragboy put out his video of where to put the lead I followed it to a T and I have to say it is dead on if you want to just set it and forget it. I had done my own version of lead placement before and it was similar but when I did it his way it worked out perfect. Now I just fill everything up all the way turn on autowake and go. I periodically through the day will flip all the switches and top the bags off and then let it do it's thing again. When surfing regular I am usually at 100, 100, 85 and for goofy it is 100,100,100 but it never drains more than 15% anywhere. I believe Autowake wont drain ballast if it knows that it will need to drain more the 20%. Instead it will tell you that pitch or roll cant be achieved and to basically move people which in that event I will ask a few people to move to the bow as it is only when I have a larger crew on a hot day (everyday here in TX) and everyone is in the cabin trying to get a little shade.


    Roberts video https://www.youtube.com/watch?v=AD1wEPrSWuw

    Side note and not related to your post Hayden: I know I probably sound like a Ragboy (Robert) fanboy but I honestly feel like he is a huge asset to the surfing world with his wealth of knowledge and information he has out there especially to us SC customers. If you have a Moomba or Supra you can basically go to his youtube, look up your specific model of boat and he has a video telling you the exact formula to get a great wave. Maybe I am in the minority on that but I feel like most other brands don't have this.
    Last edited by TXSurf4; 07-20-2022 at 02:23 PM.
    2019 Makai
    Raptor 450 w/ 1.76 Trans
    WakeMakers 1350s in the rear & 1K in Lead

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •