Wakemakers Midship piggy back bags

[Dank]

….Installed these bad boys today…..now sitting at 10,800 lbs total displacement!

[996scott]

Storage is over rated! Looks great!

[Dank]

Storage is over rated! Looks great!

Ha! Truth be told - all we were using this area for before was the lead and a few ropes...didn’t use it all season. Lead is now all tucked away, besides a few bags left out for tweaking the wave if needed.

Plenty of space for ropes and vests in rear lockers.. big cooler goes in the seat cut out slot, and another cooler in the sub floor locker. Between racks and Bimini pockets, holds 8 boards…. Still have the huge area under passenger side completely free for whatever.. especially since they relocated the batteries form there.

What else do you need? Lol.

Can’t wait to try it out!

[HFarr]

Looks good. How are they plumbed in?

Sent from my SM-G781V using Tapatalk

[Dank]

They just plug into the bags that are underneath that locker…. There is a hatch there that you open up. So basically, it’s just laying directly over the “sub floor” ballast.

Wakemakers for the win!!! Reach out to Adam Tabor if interested in ordering the parts. He shipped it immediately and had it within days.
Cheap too!!

Can’t wait to try it.

[HFarr]

They just plug into the bags that are underneath that locker…. There is a hatch there that you open up. So basically, it’s just laying directly over the “sub floor” ballast.

Wakemakers for the win!!! Reach out to Adam Tabor if interested in ordering the parts. He shipped it immediately and had it within days.
Cheap too!!

Can’t wait to try it.

Hmmmm....I may have to do that. Thanks for the info!

Sent from my SM-G781V using Tapatalk

[sleek98]

I plumbed mine in off the top of the rear bags, then ran a vent off the wake makers bag. Works like a champ.

[Dank]

Sleek - so you replaced one of the normal plugs on the WM bag with the vent you initially took off the stock bag? That’s a great idea!! Definitely going to to do that!!!

Thanks for the tip!

[Dank]

actually.. just found out the stock bags have a different thread size than the wakemakers.. (weird… why I don’t know)…. But that would make it impossible to use the old vent on the wakemakers..

Good news is the plugs that came with the wm’s have holes drilled near the top which can vent / bleed the bags if left not all the way closed.

[sleek98]

No I have hoses running from the top of the factory bag to the bottom of the wake maker bag. The. I replaced a top plug from the wake maker bag with a fitting and ran a hose to the overflow hose going out the hull connecting it with a T there.