Results 1 to 4 of 4
Thread: Ballst system fittings
-
07-15-2021, 11:24 AM #1Junior Member
- Join Date
- Aug 2020
- Location
- 44.3894° N 79.6903° W
- Posts
- 17
Ballst system fittings
Learned a lesson about adjusting ballast bags...Make sure you disconnect the fittings even if only small adjustments. I didn’t and broke an elbow.
Does anyone know if i need to order the 3/4” fitting or the 1 1/8”. 2021 Moomba mojo
Thanks
-
07-15-2021, 11:33 AM #2Senior Member
- Join Date
- Sep 2020
- Location
- Kansas City
- Posts
- 105
1-1/8" quick connect. You need 1" fly high threaded fittings if you broke that as well.
2021 Mojo
-
07-15-2021, 12:24 PM #3
i would think it is 1 1/8 but not 100% on that. Can you measure it?
Scott
2021 Craz
2007 Mobius LSV
1997 Sea Ray 190
-
07-15-2021, 05:11 PM #4Junior Member
- Join Date
- Aug 2020
- Location
- 44.3894° N 79.6903° W
- Posts
- 17
It’s the 1 1/8. Thankfully I only destroyed the elbow.