Flow 3.0 problems

[Vanfamkaiyen]

When you say flow 3.0 doesn’t engage what exactly do you mean? The surf plate is not engaging? The smaller tab not engaging? The smaller tab (what makes it “3.0”) works automatically based off your draft sensor, the heavier the boat the more it extends. You may need to recalibrate or adjust the inclinometer.... download inclinometer app and put it on the floor just forward of the t-handle access. Go into the settings and adjust the pitch and roll. The issue the wake 9 guy found was that his draft sensor was mounted too high which gave the system bad info. I’d highly recommend going to wake9.com and reading the 2 articles he wrote about the system and how it works!