Page 10 of 15 FirstFirst ... 89101112 ... LastLast
Results 91 to 100 of 141
  1. #91
    Join Date
    May 2017
    Location
    Alberta, Canada
    Posts
    305

    Default

    Quote Originally Posted by ragboy View Post
    Guys, I now have a perfectly consistent wave 100% of the time. Here is a video showing results:

    The explanation is 2 things.

    1. The new 2021 Displacement Integration system wasn't working as it should due to a draft sensor that was installed too high.
    2. The system makes a decision regarding surf tabs that I don't quite agree with, after much testing and experience.

    The great news is that SC built in settings (dealer menu) that allow these settings to be updated that allowed me to "calibrate" for my sensor issue, and remove the offset/decision made by the system for the surf tabs.

    I detail what I did in the settings in this post. I hope this helps:

    https://wake9.com/summer-of-mojo
    Thanks for the info Robert.
    2021 Mojo, 6.2L Raptor 400/1.76, Acme 3407 15.5x13, G6, Flow3, +6500 lbs ballast
    2005 Mobius LSV (sold)
    Windermere Lake, B.C., 2800' Elevation
    2021 Mojo Mods

  2. #92
    Join Date
    Aug 2017
    Posts
    143

    Default

    Quick update on this - spoke with Robert and it sounds like this is something only the dealer can do.

    But, regardless, this is huge and will do it ASAP.

    Great work Robert!!
    2021 Mojo
    2018 MAX - sold - 250 hours, absolute awesome boat.

  3. #93
    Join Date
    Dec 2020
    Location
    Boone NC
    Posts
    334

    Default

    Wrote it all down on my note pad! Glad I'm not the only one running 11mph+
    Josh
    2021 Mojo, Sold 7/15/22
    2023 Supreme S240, on order

  4. #94
    Join Date
    May 2021
    Posts
    7

    Default

    How do you see the 0-2 value to double check the draft sensor?


    Sent from my iPhone using Tapatalk

  5. #95
    Join Date
    Oct 2018
    Location
    Hockley, Tx
    Posts
    1,013

    Default

    Quote Originally Posted by Dank View Post
    Quick update on this - spoke with Robert and it sounds like this is something only the dealer can do.
    Does that apply to the Flow 2.0 section as well?


    Sent from my iPhone using Tapatalk
    2019 Makai
    Raptor 450 w/ 1.76 Trans
    WakeMakers 1350s in the rear & 1K in Lead

  6. #96
    Join Date
    Aug 2017
    Posts
    143

    Default

    Yes, I believe so.


    Quote Originally Posted by TXSurf4 View Post
    Does that apply to the Flow 2.0 section as well?


    Sent from my iPhone using Tapatalk
    2021 Mojo
    2018 MAX - sold - 250 hours, absolute awesome boat.

  7. #97
    Join Date
    Aug 2017
    Posts
    143

    Default

    Not exactly sure.

    Also not something you can access via your normal screen. Dealer needs to do it.


    Quote Originally Posted by boating406 View Post
    How do you see the 0-2 value to double check the draft sensor?


    Sent from my iPhone using Tapatalk
    2021 Mojo
    2018 MAX - sold - 250 hours, absolute awesome boat.

  8. #98
    Join Date
    Aug 2017
    Posts
    143

    Default

    Quick update: ……Ok, I just want to thank Ragboy for all the advice on the 21 Mojo setup. I followed his recipe to a “T” today and it was AWESOME! We used autowake for the first time EVER.. and it actually worked! Wasn’t dumping ballast!

    Instead, we had a CLEAN, consistent, beautiful wave all day for the first time ever! THANK YOU SIR!!!!! From now on - Just set it and forget it!!

    Ps - Keep in mind - regarding the tab settings, if you think your draft sensor is OK, no additional steps necessary. Our tabs stayed rock solid throughout the day, so assuming our sensor is fine.
    Last edited by Dank; 07-06-2021 at 12:11 PM.
    2021 Mojo
    2018 MAX - sold - 250 hours, absolute awesome boat.

  9. #99
    Join Date
    Dec 2020
    Location
    Boone NC
    Posts
    334

    Default

    Heard of a few guys around talking about upgrading their ballast this winter, anyone done anything yet?
    Im thinking about some quick self fill bags with a throw over pump. These will really only be used for those early morning sessions when I'm basically alone.

    Bow bag- I could lose this storage, the anchor storage could really fit a large fat bag in there or try to find a U shaped bag. Wouldn't also be opposed to one that goes under the middle bow seat and sits in the floor but doubt it will be enough weight. Also the bow bag could be used with a smaller crew so no one has to sit up in the bow alone.

    Rear bags- Im not opposed to having something that just sits in the floor. Even kinda liked the thought of the large floor bags if you can walk on them some

    Not even looking into plumbing anything in yet, unless someone has just figured it out already because that would be the long term plan
    Josh
    2021 Mojo, Sold 7/15/22
    2023 Supreme S240, on order

  10. #100
    Join Date
    Sep 2020
    Location
    Kansas City
    Posts
    105

    Default

    Quote Originally Posted by Josh828 View Post
    Heard of a few guys around talking about upgrading their ballast this winter, anyone done anything yet?
    Im thinking about some quick self fill bags with a throw over pump. These will really only be used for those early morning sessions when I'm basically alone.

    Bow bag- I could lose this storage, the anchor storage could really fit a large fat bag in there or try to find a U shaped bag. Wouldn't also be opposed to one that goes under the middle bow seat and sits in the floor but doubt it will be enough weight. Also the bow bag could be used with a smaller crew so no one has to sit up in the bow alone.

    Rear bags- Im not opposed to having something that just sits in the floor. Even kinda liked the thought of the large floor bags if you can walk on them some

    Not even looking into plumbing anything in yet, unless someone has just figured it out already because that would be the long term plan
    Hayden and I have the measurements worked out, and he already has the custom bags made and installed, for 1800# rears. Stocks are 1,400#. We both also have midship bags plumbed in under the seats. His feed off the middle of the custom rear bags. Mine feed off the top of the factory rear bags.

    Hayden has 2 bow bags that he manually fills to 300ish total pounds. I run 200-400# of lead up there depending on whos surfing.

    Custom rear bags will run you around 900 for the bags and fittings. Midship bags are around 350-400 depending on how you install it.
    2021 Mojo

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •