2021 Mojo

[Josh828]

Very nice. Im interested in the same set up. You will have to let me know if you can access the board storage with the rear shade up.

Apparently you can surf with the shade up which I was surprised about he admitted the 8’ would get in the way of the rope however. I’m also not getting the board storage. Don’t use it, would rather add another board rack if it ever came down to it haha

[Zog]

I really like the board pockets. It keeps them out of the way and very well supported. It looks like they have made major updates to the hardware as well. The brackets on our bimini are huge, which is why we can't fold the tower with them on it. That looks like it will probably even fold down if necessary. I am sure the extension will be nice too, but I think it would be a little bit too in the way when changing surfers over and how do you keep the rope away unless you have side tow points.

[RC_Hinojosa]

I wish there was a video showing how easy or hard it is to deploy and then put away.

I think most can agree, all the velcro straps for the OEM Moomba bimini on the A3 tower is a pita.

Sent from my Note9 using Tapatalk

[Josh828]

Velcro sucks. The salesman even said if you were going to leave it up when surfing to go for the 5’ extension. I tie up with friends for the majority of the day sometimes so i think I’ll get the 8’ and only use it when tied up.

They also said there are some videos of the other Biminis and they all fold basically the same so I’ve got to check them out.

They also also told me the warranty does NOT cover trailering sooo

[sleek98]

Plumbed in 50x20x8 midship bags (325# a side) on top of the subfloor. Should have gone with the 60x20x8.

I removed two plugs off the top of each bag put in a 1” fitting and ran lines. I used about 16’ of hose. 4 90* fittings and 4 straight connectors. 4 wake maker plugs and 4 1” bag fittings.

I need to move the bag a little and the plugs on top will be visible to burp the bag. When I drained the bag completely. Pretty happy with it.

Started down pouring when I was done. I’ll post wave pics tomorrow. Have 500# in the boat already. And another 500# to add.

[Bigs28]

How much did you spend on the bags fittings hoses? 50x20x8 comes out to 290# of fresh water but maybe the bags flex the extra 35#s.

[sleek98]

They do flex out and fill up the space, the 320 is just the rating on the website. I think it was 450 or so total.

[sleek98]

Played around with setting again and had 3 other people out with us today. Didn’t take a picture of just the wave so here is one from a video of my wife.

I also left autowake on all day since we had 2400# of people/gear/lead/bags. Never had a problem. It only dumped the front bag when my mom and son moved up to the bow from the back. Stopped at 85%

[sleek98]

[QUOTE=sleek98;369175]Played around with setting again and had 3 other people out with us today. Didn’t take a picture of just the wave so here is one from a video of my wife.

I also left autowake on all day since we had 2400# of people/gear/lead/bags. Never had a problem. It only dumped the front bag when my mom and son moved up to the bow from the back. Stopped at 85%

[blay127]

That looks pretty great sleek!


Anyone else having an issue with the surf tab actuator "set" value being different than the "actual" value? My set value is 10 higher than actual reading. It responds up and down but just reads wrong. If i go all the way to 0, it will do nothing from 0-10, then moves after I go higher than 10. I've gone into the setting menu and reset(or retract) flow plates but that doesnt change the issue. Thoughts?