
Originally Posted by
Dank
Also.. Not having ANY success with autowake..
Trying to mirror the wake 9 pitch and roll settings (9 and -1.5) and it's dumping ballast non surf side and front like crazy.. like front is down to 50%.. results in a very pretty wave with zero push... beyond frustrated with it.
Yes, additional lead, yes, had a big crew.
Coming from a 18' Max that had an awesome wave and no autowake. If we could at least get it that good I'd be happy. I know it needs to be dialed in.. but so far no bueno. Getting seriously concerned.
All advanced, experienced surfers, we know what we are taking about .. so it's not beginners saying "no push"...
I guess next time we'll go old school and try without autowake and just go from there.
Is anyone having success with it at all on the mojo??

Fill all your ballast 100%, turn on Autowake and use static mode to shift your lead till you hit your pitch and roll settings.
Turn off Autowake.
Fine tune with speed and surf tab. At this point you should be slammed and with AW off, there is no dumping of ballast.
Sent from my Note9 using Tapatalk
2017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX