Results 1 to 10 of 19
-
05-09-2021, 03:25 PM #1
Moomba Max Wakemakers midship overflow venting tutorial
This mod is pretty well documented by z28ke with his pictures and posts in his Murder Max mod thread (much appreciated). This is a slight variation on his install based off recommendations by folks on the forum and the FB owners group. Figured I'd do an install video of the mod in case it helps others understand. Unfortunately I forgot some tools that I eventually would need so I wasn't able to finish the install entirely but you get the idea of the install in the video. In the part 2 video I will pick up where I left off on the install as well as do a fill and drain water test on the lake.
2019 Moomba Max "MOOMBAE"
Mods: Wakemakers upgrade + 500 lbs of lead
2016 Yamaha AR192 - sold
-
05-23-2021, 12:33 PM #2
Happy to report the venting works like a champ! Fills great and I did not get a false full ballast sensor trip midway through the filling! The check valve allows the bags to drain SO much better than without a check valve. They were prunes once draining was complete.
Here's a video of them getting full and burping on their own as the water rises in the tubing....
2019 Moomba Max "MOOMBAE"
Mods: Wakemakers upgrade + 500 lbs of lead
2016 Yamaha AR192 - sold
-
05-23-2021, 02:11 PM #3
Nice video. I can appreciate it even if the girls in the boat do not. LOL!
I can hear there thoughts now. "OMG! Why does he think anyone will want to see this? I hope he doesn't show me in this and my friends see it. How embarrassing. " LOL!
Sent from my moto z4 using Tapatalk2021 Moomba Makai
Black Cherry Metal Flake & Fire Red
Nibral OJ 15.5x15 Altitude/Wake prop w/1.76 trans v-drive
Wet Sounds bow speakers & 10's on the Tower & ported sub
-
05-23-2021, 03:08 PM #4
Haha yes they are such good sports for putting up with me! My daughter does all the camera work when I’m behind the boat
2019 Moomba Max "MOOMBAE"
Mods: Wakemakers upgrade + 500 lbs of lead
2016 Yamaha AR192 - sold
-
05-23-2021, 09:14 PM #5
Here is how I tied in my rear bag overflow to the midship overflow, then down to the check valve and finally out the boat. The idea of putting the T like that instead of like T to tie in the rear and midship bags inline was I didn't want a cycle of the midship back-flowing into the rear bag or visa versa. The way I have it is kind of like a waterfall for each overflow bag to dump down into the check valve. Seems to work great and my backs have never drained as tight and empty as they do now.
Here is what I made outside the boat where it's easier to work and then trimmed it to fit once inside the compartment...
2019 Moomba Max "MOOMBAE"
Mods: Wakemakers upgrade + 500 lbs of lead
2016 Yamaha AR192 - sold
-
05-25-2021, 07:49 AM #6
Nicely done and great write up!
2018 Murder Max
2008 Outback V-Bought new; sold in 2018
-
05-26-2021, 02:03 PM #72019 Moomba Max "MOOMBAE"
Mods: Wakemakers upgrade + 500 lbs of lead
2016 Yamaha AR192 - sold
-
05-29-2021, 10:34 PM #8
Here's the final Part 2 video of this install.
2019 Moomba Max "MOOMBAE"
Mods: Wakemakers upgrade + 500 lbs of lead
2016 Yamaha AR192 - sold
-
06-29-2021, 04:06 PM #92019 Makai
Raptor 450 w/ 1.76 Trans
WakeMakers 1350s in the rear & 1K in Lead
-
06-29-2021, 07:13 PM #10
Great vid's and write up Hak! I'm planning to do something similar with mine in the coming week.
2021 Mojo, 6.2L Raptor 400/1.76, Acme 3407 15.5x13, G6, Flow3, +6500 lbs ballast
2005 Mobius LSV (sold)
Windermere Lake, B.C., 2800' Elevation
2021 Mojo Mods