Quote Originally Posted by tazz3069 View Post
Well the Impellor is finished. It took me all about 20 min. Took off the 3 bolts on the balancer, and the single bolt at the base, gave it two shakes and it came right off. Put a little grease on the new impellar and reinstalled. I did not even get to finish my beer. Hold on_______________________ Ok now I finished my beer. Thanks again Jesse.
tazz,

You lucky dog! I could not get the impeller housing to separate from the harmonic balancer no matter what I did. I even pounded on it with a rubber mallet. I was able to R&R the impeller without removing the housing though so it's all good.

Al