Results 1 to 3 of 3
-
04-14-2021, 04:39 PM #1Junior Member
- Join Date
- Oct 2017
- Posts
- 15
Retaining nut & coupling set screw question
I have an '04 mobius and I am replacing my shaft seal. When removing the retaining nut from from shaft I noticed that it was not very tight. When reinstalling everything back, I tightened the nut to shaft (read it needs to be 60 - 70 ft/lbs) and the set screw. Problem is that the set screw completely misses the retaining nut now.
Do I need not tighten retaining nut as tight or can I add a washer between coupling and nut so set screw is on the retaining nut? Thanks!'04 Mobius LSV
-
04-14-2021, 05:16 PM #2Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
04-14-2021, 06:19 PM #3Junior Member
- Join Date
- Oct 2017
- Posts
- 15
I hope that's not the case, but we'll see on day! Thanks.
'04 Mobius LSV