Help with trailering questions

[Turbinesurgeon]

What boat do you have? I just want to make sure it can hold the weight of the SA.


Sent from my iPhone using Tapatalk

I have an 06 24V but it doesn’t carry much weight at all or if any on the bow. Your bunks should take all the weight with the majority concentrated near the axles.


Sent from my iPhone using Tapatalk

[larry_arizona]

Website says up to 6000# boat


Sent from my iPhone using Tapatalk

[DDD123]

Most states it's required. I never used them for local launches myself. Get on the highway and troopers look for what they consider unsecured loads.

So as my signature states I have an SE, anyone have a good place to buy some on Amazon?

[sandm]

https://www.walmart.com/ip/BoatBuckl...3-2pk/32926701

these are the ones I added to all 3 boats. larry commented on stainless versions that can be had for a benjamin but I've never spent the coin as I don't boat in salt.
I've seen some pretty large twin/triple engine go fasts at the gas pumps using the same ones so I would think they will work fine for an SE but ymmv.

[eder10986]

I have stainless boat buckles too. Not 100% necessary for SS and my use. But absolutely best tiedowns ever.


Sent from my iPhone using Tapatalk

[eder10986]

Drotto can take a 10k lb boat. Might look into that one.


Sent from my iPhone using Tapatalk

[eder10986]

Also - boatmate confirmed it’s a friction plate. Will likely need to be replaced.


Sent from my iPhone using Tapatalk

[sandm]

Also - boatmate confirmed it’s a friction plate. Will likely need to be replaced.

glad they were able to assist. good folks there and build a great trailer.

[larry_arizona]

https://www.walmart.com/ip/BoatBuckl...3-2pk/32926701

these are the ones I added to all 3 boats. larry commented on stainless versions that can be had for a benjamin but I've never spent the coin as I don't boat in salt.
I've seen some pretty large twin/triple engine go fasts at the gas pumps using the same ones so I would think they will work fine for an SE but ymmv.

I got a pair of G2 SS boat buckles $83 shipped from Wally World.

Lube the shit out of the mounting hardware and torque slowly.


Sent from my iPhone using Tapatalk

[DDD123]

https://www.walmart.com/ip/BoatBuckl...3-2pk/32926701

these are the ones I added to all 3 boats. larry commented on stainless versions that can be had for a benjamin but I've never spent the coin as I don't boat in salt.
I've seen some pretty large twin/triple engine go fasts at the gas pumps using the same ones so I would think they will work fine for an SE but ymmv.

Ordered, thanks brother!