Results 1 to 10 of 15
Thread: Tools and Compound to Wax/Polish
-
03-18-2021, 08:03 PM #1
Tools and Compound to Wax/Polish
I see Larry’s post on ceramic coating and it’s something I’d consider in the future, however, I have zero experience with polishing, buffing, compounds or tools.
Personally I’m a dewalt fan and have a bunch of 20v tools and was thinking of getting their variable speed polisher which then confused me further because it has different speeds etc.
This is my current goal:
Have tool(s) to occasionally wax and polish hull
Have compounds or solutions appropriate for the task
Instructions on how to do it.
Once I get comfortable then next season I might dive in further and ceramic coat.
Be kind. Remember. Besides wax on wax off I have zero experience with this
Thanks!
Sent from my iPhone using Tapatalk
-
03-18-2021, 08:19 PM #2
My brother just got that DeWalt DA polisher, I am teaching him how to polish his truck and ceramic coat it.
I will let you know how the polisher works.
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
03-18-2021, 08:33 PM #3
I’d recommend a gear driven orbital, flex 3401. I love mine.
Next, jump over to the autogeek forum. Lots of good info there.
3rd, come back and revisit this thread and we will get the ball rolling.
Sent from my iPhone using Tapatalk
-
03-18-2021, 08:52 PM #4
I was just speaking with John about this. He's the owner of Hula Boat Care and he personally likes the Makita 9227C. I plan on ordering one this weekend so I can surface prep and then do a few silica coatings.
Sent from my Note 9 using Tapatalk2017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
-
03-18-2021, 09:10 PM #5
Tools and Compound to Wax/Polish
https://youtu.be/Tiz2WpCI4sY
Cordless is nice, however I have no issue with a corded unit.
If I was a pro, I would consider a flex or rupes as they are powerful yet smooth and it greatly reduces fatigue.
I would also consider rupes pneumatic as they are so light weight and that would make a big difference running 8 hours a day.
I do not recommend any rotary as a beginner. You can wreck a paint job in a hurry with a rotary. Took me a decent learning curve to run a rotary.
DA’s and compounds have come a long way that rotaries are not really required. Pretty hard to screw up with a DA.
Sent from my iPhone using TapatalkLast edited by larry_arizona; 03-18-2021 at 09:20 PM.
2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
03-19-2021, 08:02 AM #6
Thanks for the advice so far. Looks like I’m staying away from rotary.
Larry I’m curious about your thoughts on the dewalt. At a $220 price point and me as a beginner it could be something easy to use and I have a ton of batteries.
What compounds do y’all use, or what are the “steps”?
Sent from my iPhone using Tapatalk
-
03-19-2021, 09:38 AM #7
Tools and Compound to Wax/Polish
I have done a lot of research on compounds and pads for gelcoat.
A few to consider in no particular order.
Gyeon marine step 1
Gyeon marine step 2
Rupes DA course
Rupes DA fine
Menzerna 400
Menzerna marine one step
3D one step
I didn’t list the 3m and Meguiars marine compounds due to the dust they create, they work great, just super messy.
Modern compounds work great with DA’s
As far as pads.
I watched Mike Phillips (auto geek) detail a boat and he recommends using the Rupes coarse blue pads for the highest finish gloss on gelcoat. He swears the sharp pads work better than the fine yellow pads.
I have tried blue and yellow so far on my boat and I will say blue does finish a little better.
Sent from my iPhone using TapatalkLast edited by larry_arizona; 03-19-2021 at 09:40 AM.
2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
03-20-2021, 04:56 PM #8Member
- Join Date
- Mar 2020
- Location
- Logan Martin Lake, Alabama
- Posts
- 80
The first time I ever polished anything was last fall when I did the boat. It seems like something that can be as overly complicated or easy as you want it to be. I just wanted to get her shiny and get the lake funk off. Anything more than that and I would need hands on instructions or pay someone to do it.
I got a corded VS Dewalt and ordered the kit from Hula that had 3 pads and 3 compounds, spent 3 days do a little at a time. At the end, I was happy with what I accomplished. Was it perfect? Nah. But it looked good to put up for the winter and I know more than I did. The Hula products were great and are very user friendly. Maybe not the highest end compounds but that wasn't what I wasnlooking for.
2004 Moomba Outback LS
2016 Wrangler JK
-
03-20-2021, 07:17 PM #9
Tools and Compound to Wax/Polish
That’s great Jim. That’s sort of what I’m after. Boat has some gunk on hull from the runoff of the cover and some surface scratches id like to get rid of.
You can see them in this pic if you zoom In.
Don’t mind the water....we had just had rains for like a month and and it was all runoff
Attachment 29508
Sent from my iPhone using Tapatalk
-
03-22-2021, 09:15 AM #10
Tools and Compound to Wax/Polish
What compound do you think would be best for my boat Larry? It has no oxidation and by no means is in bad shape, but I’d like to get it closer to my standards.
I don’t really want to spend $60 per bottle, (but boy do I like me some menzerna)
3D one step? Does it have enough cut for gel coat? I’ve had marine 31 heavy and fine cut in my cabinet for some time. But I think the heavy cut is gone and I’m not too impressed with it.
Sent from my iPhone using TapatalkLast edited by j.mo; 03-22-2021 at 09:17 AM.