Results 1 to 6 of 6
-
10-03-2020, 12:13 PM #1Senior Member
- Join Date
- Nov 2019
- Posts
- 165
Using stock fly high bags manually
I swapped out my stock fat sacks for the wakemakers bigger bags. If I want to use the stock bag manually , what do I need to do? I realize I値l need a tsunami pump and need to remove the fill fitting. I知 thinking I need some sort of adapter/fittings to plug the old fill port at the bottom and one to connect the tsunami pump for manual fill?
-
10-03-2020, 07:18 PM #2Member
- Join Date
- Sep 2018
- Posts
- 43
These are what you are looking for. There is a video in the link also. This will help remove factory fittings
https://www.wakemakers.com/supra-moo...tting-kit.html2018 Mondo
-
10-03-2020, 08:54 PM #3Member
- Join Date
- Sep 2016
- Location
- Horseheads, NY
- Posts
- 59
Be careful as some of the factory fittings are glued in and can't be removed without ruining the bag. Call the bag manufacturer just to verify
-Scott
2000 Moomba Mobius V
-
10-03-2020, 08:54 PM #4Senior Member
- Join Date
- Nov 2019
- Posts
- 165
Thanks so much Byezb, just ordered it
-
10-03-2020, 08:56 PM #5Senior Member
- Join Date
- Nov 2019
- Posts
- 165
I appreciate the heads up Scott. As it happens , fly high is about a mile from where I live, I値l stop by and ask.
-
10-03-2020, 08:58 PM #6Senior Member
- Join Date
- Nov 2019
- Posts
- 165
I have about 4300 lbs of ballast already but have the extra two stock 650s. I want to experiment, maybe put the extra 650 in the front to try to lengthen the wave and just curious to see if more weight helps