Results 101 to 110 of 149
Thread: FAE Install Pics
-
07-31-2020, 01:09 PM #101Senior Member
- Join Date
- Jun 2016
- Posts
- 290
UGH, I dunno if this is going to work. this tip is very close to the surf plate.
2019 MAX
2015 Mobius LSV Surf Edition (SOLD)
2001 Supra Sunsport SSV- SOLD
2017 Ram 2500 Crew Cummins 6.7L
-
07-31-2020, 01:32 PM #102Senior Member
- Join Date
- May 2020
- Location
- Nashville
- Posts
- 236
Can you turn it left or right 45* so it’s pointing to the center or side and not directly on the plate?
2018 Moomba MOJO
4100lbs. ENZO's, Center Tank, IBS
1080lbs. Lead Wake
Raptor 400
Surf Prop: OJ 945
2019 Ford F150 FX4
5.0L V8
-
07-31-2020, 01:34 PM #103Senior Member
- Join Date
- Jun 2016
- Posts
- 290
no. that is the shortest way
2019 MAX
2015 Mobius LSV Surf Edition (SOLD)
2001 Supra Sunsport SSV- SOLD
2017 Ram 2500 Crew Cummins 6.7L
-
07-31-2020, 02:21 PM #104
FAE Install Pics
I’d cut back the downturn a bit to give it a little more clearance.
Make the end have a 45° slash, looks like it’s around 60° right now
It’ll be plenty open like that. Remember, I t’s flowing gas not a full stream of water.
Sent from my iPhone using TapatalkLast edited by Stazi; 07-31-2020 at 02:24 PM.
2017 Moomba Craz
-
07-31-2020, 02:50 PM #105
If that is the stock exhaust tip, why would it be an issue?
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
07-31-2020, 04:54 PM #106
-
07-31-2020, 10:39 PM #107Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
08-01-2020, 12:33 AM #108Senior Member
- Join Date
- Jun 2016
- Posts
- 290
I opted to have it cut. I took it to a local welding shop. their good saw was broken. So I just had the kid lob it off the Porta band. I took it home and put it on a belt sander to get rid of most of the egregiously Gross cut that it came out with. I sent fresh air exhaust the pictures of the broken pipe. But no one has responded and I'm getting the feeling that they really don't give a shit and that really pisses me off as I am not to found of this pain in the ass project.. Not to mention I'm fn up an $80,000 boat in the process.
2019 MAX
2015 Mobius LSV Surf Edition (SOLD)
2001 Supra Sunsport SSV- SOLD
2017 Ram 2500 Crew Cummins 6.7L
-
08-01-2020, 02:33 AM #109
Late to the show but the lateral forces on the pipe would require additional bracing. With the pipe offset from the transom outlet, there will be rotational forces at the flange. One good flange at the top of the pipe directly back to the transom would eliminate most of the torque on the flange. Most of the time you would never see it as the swim platform would be covering it. The flange would have to be stout as it would hopefully take the brunt of the stresses that the flange was taking.
1998 Mobius
310 HP PCM
SOLD
-
08-01-2020, 08:38 AM #110Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
Last edited by parrothd; 08-01-2020 at 08:42 AM.
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead