Results 71 to 80 of 131
Thread: 2021 supra and moomba
-
07-13-2020, 10:09 PM #71Junior Member
- Join Date
- Oct 2014
- Location
- PA
- Posts
- 9
20 footer
It would be nice if they came out with a 20 footer that would surf and slalom well. My friends and family seem to surf and ski a lot but not wakeboard as much as we used to. I’m starting to rack up some hrs on my 2011 OBV and have no idea what I’d replace it with. If they’re going to release a new 20 footer they might as well make it crossover worthy as the only reason I wouldn’t just go to a big surf only oriented Boat is that we all still enjoy ripping a slalom ski on a glassy morning or eve. Seems like malibu and nautique still recognize that niche but SC has ignored it.
-
07-14-2020, 02:52 AM #72Junior Member
- Join Date
- Jun 2020
- Posts
- 2
-
07-14-2020, 08:26 AM #73Member
- Join Date
- Jun 2016
- Posts
- 41
That is exactly what we are looking for too. We ski in the morning and evening. We’d like to surf after lunch when the chop and wind are up.
Skiing and surfing are on the opposite ends of boat-abilities though—so it’s tough to get something that will do both moderately well. With 3700lbs ballast the new Mondo should have decent surfing, but likely a smaller pocket that comes with a shorter boat. I’m not hoping to compete with a ski boat for wake—but hopefully something that won’t kill people at 28mph.
-
07-15-2020, 07:43 AM #74
I think someone was on here complaining about the FX One tower rattling....
Here's a quick writeup on how to address the issue without a dealer trip:
https://www.facebook.com/groups/1786...8843047854508/
Sent from my Note 9 using Tapatalk2017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
-
07-15-2020, 08:30 AM #75
For those of us who don’t Facebook, can someone please copy paste the fxone procedure here?
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
07-15-2020, 09:01 AM #76
My bad Kent...
"2018 and up Supra owners, if you think your FX1 tower is a bit rattling or moving, here's how to fix it without taking it in... my dealer called to walk me through how to do it on my lift....very easy, 10 minute - 1 beer job. 3/16 hex bit, 3/4 wrench, 4 screws a side, then 3 nuts to tighten per side. Don't let the panel fall."
Sent from my Note 9 using Tapatalk2017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
-
07-15-2020, 09:21 AM #77
Thanks RC!!
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
07-15-2020, 09:40 AM #78
Literally just checked both sides on mine and tight as can be.
15 min or less to check.
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan
-
07-15-2020, 01:40 PM #79
KnoxMojo on the good Fbook post on the tower procedure!
2018 Supra SL400
-
07-15-2020, 02:02 PM #80
kudos for skiers choice for a part on a boat that is (1) easy to get to and (2) easy to tighten.....
'06 Supra Launch 20SSV-gone but never forgotten