Update: Bags were ordered and shipped out that same day, to my surprise. So that's good. Kudos to them for being on top of their stock status.

Although the bags were ordered, I still hadn't ordered the fittings. My original post above was incorrect. There are five (5) ports per bag. Two on the top, two on one end, and one on the other end (at least as far as I can tell from the photos). With that, I now needed three plugs and two male fittings for each bag. This adds another $10 to the order. Still, if this all works out, the fittings and bags together will be $90 cheaper than the kit.

I did some more digging with regards to the fitting size. Flow-Rite has a website and their catalog shows photos with dimensions of the fittings. Based on the dimensions shown in the catalog and what I measured in the boat, I'm 99% sure the fittings are the 1-1/8" versions, not the 3/4" version. I placed an order with all of the fittings that I think I need. I'll report back once everything arrives sometime mid next week.

2020-06-30.jpg
2020-06-30 (1).jpg