I used an old go pro velcro wrist strap I had laying around and cut and file down the "attachment" part to make a flat smooth surface to mount the remote to.
I did not glue it because the back of it is the cover for the battery. Not sure how long the battery lasts but still wanted to access it if I needed to.
I used permanent double sided mounting tape.
https://www.amazon.com/Heavy-Duty-Ex...650668&sr=8-12
I was nervous about it coming off but it has been holding pretty good.
If I was to glue it, I would just put a dot of Fuze it on the back of the remote battery cover so I could twist the remote off and the battery cover would be stuck to the strap.
Just remember to do a little water proofing to the remote. I simply used a hot glue gun to smear some over the tiny holes and notch the on the back of it that looked like water could get in.
Seems to work, I have had it completely submerged of course and it still works.
This wrist strap seems like it would be easy to modify for it.
https://www.amazon.com/Walway-Adjust...647072&sr=8-26
Sent from my SM-G960U1 using Tapatalk
Senior Member
Thank you for the info and testing it out, I’ll give that a shot!
Originally Posted by htfit
2018 Murder Max
Reply With Quote