Results 1 to 10 of 11
-
05-24-2020, 09:00 PM #1Junior Member
- Join Date
- May 2020
- Posts
- 4
2003 Moomba Outback replacement muffler Inlet 3.5" x outlet 3"
Hi Moomba Family. New to this forum and second season owning my boat. Put it in the water and the muffler has a split as does the inlet hose. Struggling to find a replacement new or used muffler with a 3.5" Inlet and a 3" outlet and a 45 degree on the inlet. Anyone direct me in the right direction to source one or advice on a suitable muffler to swop out solution. So appreciated. Thanks.
Phil
-
05-26-2020, 10:17 AM #2
https://www.marinepartssource.com/3-...RoCMNUQAvD_BwE
Sent from my iPhone using Tapatalk2017 Moomba Craz
-
05-27-2020, 01:41 PM #3
I pulled them out entirely. I use a piece of SS tubing from the guys at FAE. Since they are water cooled they never even get uncomfortable to touch. I like the sound too but I run the full FAE system.
2008 Moomba Outback DD resurrection
-
05-28-2020, 09:53 AM #4Junior Member
- Join Date
- May 2020
- Posts
- 4
-
05-28-2020, 09:55 AM #5
Use this to make the transition.
https://www.motionraceworks.com/prod...QaAv24EALw_wcB
Sent from my iPhone using Tapatalk2017 Moomba Craz
-
05-28-2020, 09:56 AM #6Junior Member
- Join Date
- May 2020
- Posts
- 4
you dont have photos you can share do you, may be the way to go. Appreciate it. Thanks
-
05-28-2020, 09:56 AM #7
Use this to make the transition
https://www.motionraceworks.com/prod...0aAhXHEALw_wcB
Sent from my iPhone using Tapatalk2017 Moomba Craz
-
05-28-2020, 11:13 AM #8
-
05-28-2020, 02:23 PM #9
If you have ever worked with fiberglass they can be repaired.
jy
-
05-28-2020, 04:59 PM #10Senior Member
- Join Date
- Jun 2007
- Location
- Calgary Alta Canada
- Posts
- 926
I initially replaced one muffler due to splitting at a seam.
I initially fixed a splitting muffler at the seams, via fibreglass etc, but finally replaced. Bought at ski dim. Problem was that number and model I got from them was wrong. Apparently a batch or two were given different mufflers than what specs said.
After receiving my muffler, now mufflers I had to deal with what you said, wrong size outlets, and being far away and needing the part at that moment my solution was going to a muffler shop and getting a short piece of stainless 3” pipe then stretching the other end out to 3 1/2” to an exact fit then using fern o plumbing fittings to mate them all together. Works great..
Sadly boat not available at the moment to get pics to show what I did.07 Outback DD