Results 1 to 6 of 6
Thread: Opps.. my wake board rack
-
05-03-2008, 07:18 PM #1Senior Member
- Join Date
- Aug 2007
- Location
- Toronto, Ontario
- Posts
- 187
Opps.. my wake board rack
Hi. I just brought my boat to my local slip from the dealer where it was stored for the winter. Unfortunately, I bumped the wake board rack and the two screws broke.
I have the standard rack that came on the tower of a 2007 Moomba Outback. They are fairly long screws that use allen keys.
Does anyone know the exact specs of these two screws so I can get replacements?
Thanks.2007 Moomba Outback
99.999% Slalom, 0.001% Wakeboarding
-
05-03-2008, 10:30 PM #2
Go to a store that specializes in bolts. They have almost every bolt made.
-
05-04-2008, 10:51 AM #3
Take one out of the other side and take it with you to the store for a match. Can't go wrong doing it that way.
07 Mobius LS--Razorback Red
-
05-04-2008, 11:35 AM #4Senior Member
- Join Date
- Aug 2007
- Location
- Toronto, Ontario
- Posts
- 187
I would like to get a screw from the other side, but it's an hour away and I didn't have the right allen key at the time.
Fortunately, there was no damage to the actual rack or cage.
Laz2007 Moomba Outback
99.999% Slalom, 0.001% Wakeboarding
-
05-04-2008, 07:15 PM #5Senior Member
- Join Date
- Feb 2007
- Location
- Orange County, CA
- Posts
- 213
-
05-05-2008, 08:18 AM #6
I would call the company that made the racks. I did the same thing with a set of clamps.
The screw broke inside. I finally got it out, went to Home Depot to get a new screw. I tried metric and standard. Nothing fit. I call the company that made the clamps and they sent me a set of new ones for a small price.Tazz 07' Moomba LSV --Kicker Marine Amps (MX700.5 & MX350.4) 6 polk DB651 speakers, 4 MB Quartz Marine Speakers, 10" Boston Acoustic Sub, Z-5 Cargo Rack, Custom Speaker/Light Bar, modified ballast system, Custom LED Rings
Live life to the extreme and no less!!