Results 31 to 40 of 63
Thread: Max Ballast Questions
-
08-13-2019, 06:29 PM #312019 Moomba Max
-
08-13-2019, 06:50 PM #32
Nice!!^^
Do your lines get pinched or anything once the bag is full? Also which bag are you running or have a parts list of your setup?2019 Moomba Max "MOOMBAE"
Mods: Wakemakers upgrade + 500 lbs of lead
2016 Yamaha AR192 - sold
-
08-13-2019, 10:58 PM #33Member
- Join Date
- Jun 2015
- Posts
- 80
What I did was plumb a 700 lb bag in the nose, 600lbs of lead spread throughout, and an 1100 lb bag under each bench (I had them from another boat). I manually fill the 2 side bags to about 600 lbs each. Drain them when the boat comes out of the water. Takes about 10 minutes.
2014 Moomba LSV
2018 Moomba Max
-
08-16-2019, 12:36 AM #34Senior Member
- Join Date
- Jun 2016
- Posts
- 288
so I am having a few issues. I finally vented my bags after paying a redonkulous amount of money in fittings.
It seems that the check valves do not let water flow out easily. Yes, I have the arrows pointing out. My ports bag will get rock hard but will not vent. I think that is creating a ton of pressure on my pumps which dont seem to be working that well anymore either.
Also, Does anyone know the trick to keep wakemakers plugs from leaking?2019 MAX
2015 Mobius LSV Surf Edition (SOLD)
2001 Supra Sunsport SSV- SOLD
2017 Ram 2500 Crew Cummins 6.7L
-
08-16-2019, 06:16 PM #35
Well, WM was on a 3 week back order. Site said in stock, and I paid for expedited shipping, but nada. I was kind of expecting this after looking at their FB complaints lol. I still want them, so I didnt cancel, but Im also very impatient, so luckily, a local shop had some sacs. I was able to grab a couple 750s, and 260s. Everything is on sale. Spent about $250 on all 4, which is making me question how much Im spending on WMs lol. Im gonna give Murder Max's setup a try in the AM, since hes running similar weight. Ill be sure and report all my frustrations tomorrow evening lol
-
10-04-2019, 06:03 PM #36Member
- Join Date
- Aug 2018
- Posts
- 41
Derek, do you have any issues with the new mid ship bags draining? Also, did you tie the new vent into the thru hull vent line? Wakemakers keeps telling me there is now vent line on the 19s.....yet I'm looking at it. Was going to do mine that way instead of drilling.
thanks2019 Moomba Max
-
10-04-2019, 09:26 PM #37
-
02-11-2020, 11:14 PM #38
Would you mind making a crude MS Paint diagram how you have you bags plumbed? I have the WM kit for my 2019 Max and I don’t want to have any fill or drain issues I’ve seen mentioned or make the pumps work harder than needed. I was hoping these would be plug and play but apparently more involved than I thought. I’m a newb at plumbing this. Any help would be appreciated!
How are the 2020 Max's with the optional midship plumbed?Last edited by haknslash; 02-11-2020 at 11:28 PM.
2019 Moomba Max "MOOMBAE"
Mods: Wakemakers upgrade + 500 lbs of lead
2016 Yamaha AR192 - sold
-
02-12-2020, 12:19 PM #39Senior Member
- Join Date
- Jun 2016
- Posts
- 288
PM me your email address and I will send you my crude drawing.
2019 MAX
2015 Mobius LSV Surf Edition (SOLD)
2001 Supra Sunsport SSV- SOLD
2017 Ram 2500 Crew Cummins 6.7L
-
02-12-2020, 01:45 PM #40