Quote Originally Posted by flienlow View Post
(My boat was setup by dealer)

How it is configured:
Rear bag front ports fill center locker bags
Center locker bag top "Vent" Port routes back to rear bag vent port.

My Rear bags do not vent out the side boat
I need to manually vent air when I fill them.

How are the rear ballast supposed to vent? At the rear of the bags there are 3 lines. I assume that 2 are for the pumps, and 1 is for the Venting? Typically in the past I have seen the vent port go right out the side of hull.


Thanks.
i upgraded mine with wakwemakers kit, ive been playing around a lot with them since there is no instructions whatsoever. mine get air in them a lot and do not vent well, so open up the highest vent plug slightly until most of the air comes out. then i will turn the fill switch on and off until it vents over the side. the pump will come on if you recycle the switch for a little bit even if the screen is showing 100%

I would like to see how other people use the system