Quote Originally Posted by flienlow View Post
Question. What if Autowake is not setup correctly? I don't know what the stock Autowake settings are, my boat was "Tuned" by the dealer. In the past Autowake wanted more Port weight, when all passengers were on the Port side. It drained the starboard tank, our wake was shit. I am sure these are issue that can be figured out though.

It seems like I should just keep all my ballast and roll the boat with the surf plates?
You should need roughly 9 degrees nose up and 3.5 roll to regular and around 5 goofy. That’s a pretty decent setup for this running surface. Even if Autowake doesn’t have those angles inputted, just change them to that. Those are the basic ideal angles.

Rolling with plate tends to lift the boat a bit....but that’s one way to work toward it. I like to get the angles correct, be sunk as far as possible, and use as little plate as it takes to form a wave.

Auto awake itself is a pretty darn cool system even if you don’t use it all the time. But it’s definitely not useless.


Sent from my iPhone using Tapatalk