Results 1 to 9 of 9
Thread: How to test swell tabs
-
06-11-2019, 12:03 AM #1Junior Member
- Join Date
- Aug 2018
- Posts
- 18
How to test swell tabs
Anyone know how to, or If one can, engage or deploy the swell tabs when the boat is not moving, like on the trailer to test them? I'm trying to troubleshoot why my swell tabs don't work. I can do the center tab, but not sure about the swell tabs. 2015-17 Supra models
Sent from my SM-G965U using Tapatalk
-
06-11-2019, 06:42 AM #2
You should be able to turn on the surf system to one side and it will instantly deploy the opposite tab.
I.e. if you select surf left, it should deploy the right tab immediately.
Sent from my iPhone using Tapatalk2017 Moomba Craz
-
06-11-2019, 07:57 AM #3Junior Member
- Join Date
- Aug 2018
- Posts
- 18
Thanks, have you done this while the boat is not moving? The warning states that the cruise must be active between 9-12mph.
Sent from my SM-G965U using Tapatalk
-
06-11-2019, 10:55 AM #4Senior Member
- Join Date
- Aug 2011
- Posts
- 2,522
http://www.instgram.com/jlyons30
2002 Moomba Mobius LSV - Sold
2006 Moomba Mobius LSV - Sold
2017 Moomba Craz - Enzos, Lead
-
06-11-2019, 11:37 AM #5
On the Moombas it activates immediately and does not require a certain speed to deploy.
Sent from my iPhone using Tapatalk2017 Moomba Craz
-
06-11-2019, 01:42 PM #6Senior Member
- Join Date
- Oct 2016
- Location
- Tims Ford Lake TN
- Posts
- 454
I'd guess the Supras are same, not sure: On my Mojo the actuators go through a start-up sequence of movement when the key goes to the run position. You don't have to even crank it while its on the trailer. Just have someone move the key while you watch on the ground.
2016 Mojo Surf
Raptor 400
1100 rear bags / 500 IBS / 600 LeadWake
Exile amps/tower - Kicker in-boat
FAE
-
06-11-2019, 02:47 PM #7Senior Member
- Join Date
- Aug 2017
- Posts
- 1,382
I believe there is a dealer code that can get you into this mode. I don’t know it, but someone probably does?
Sent from my iPhone using Tapatalk
-
06-11-2019, 07:23 PM #8Junior Member
- Join Date
- Aug 2018
- Posts
- 18
I found the problem. This breaker was off, so no power to some of the toggles, the swell plates, and the steering column cruise adjust. The swell plates do adjust now from the screen, with the boat on the trailer. I can't believe I didn't check this earlier.
Sent from my SM-G965U using Tapatalk
-
06-11-2019, 08:10 PM #9
I recall during my dealer delivery, he showed me the breakers and said if anything stops working, check breakers first.
Glad it was simple.
Sent from my iPhone using Tapatalk2021 Supra SA 400
2018 Supra SA 400 (SOLD)
Michigan