Hoping someone can help with this one, I'm trying to recalibrate the roll in the Autowake Settings menu on my 2019. Doing this because Autowake keeps filling port ballast double over starboard. This happens no matter who is in the boat or where weight is. We'll have the wave perfect with manual ballast, turn on autowake and it'll drain starboard to almost zero.

Anyway, when trying to recalibrate roll, I select "yes" when the "set roll to zero" confirmation screen pops up. But then in the main display roll continues to display what it is currently (0.8 as pictured).

Doing this at 20mph with wake perfect, as told to in the 2019 display manual.

Here's what Autowake does at 30% amplitude, with me standing in the center of the boat and no other people/gear on the boat, completely washed starboard side but port looked good:


Here's the Autowake settings screen AFTER setting roll to zero: