Murder Max Mods

[z28ke]

Like I said it's functional and cheap. it'll get ya by. I've got a pile of leftover stainless cupholders. Hit me up before you buy any! LOL.

Will do, thank you!!!

[haknslash]

Where would you even add permanent cup holders to a Max in the bow if using the cushion? The entire bow is upholstered with no flat fiberglass surfaces other than the gunnels. I kind of wished they added them to the front of the filler cushion basically in the same place as the cup holders they cover up.

[BrettLee3232]

Get 4 cup holders from Trayson & mount them here....


Sent from my iPhone using Tapatalk

[trayson]

The blue arrows is where I was thinking. Don't know if there's space at the red arrows but definitely worth considering too

[[email protected]]

Here’s what a lot of folks have expressed interest in - adding hinges to the bulky side bench seats on the max.

Keep in mind I am adding ballast under these seats so I don’t need access to the bottom of the compartment. If I was using it for storage I would use a different type of hinge so the seat goes up and back instead of forward and down.

Note: This is a temporary test run to see if they will work. I only put 2 screws in the seat bottom and used double sided sticky tape on the seat base. I’ll go back and add more screws to the seat and drill out the base and use machine screws with washers and nylon lock nuts when I have more time.







A link to the hinges:

https://www.greatlakesskipper.com/lu...SABEgIWwPD_BwE

This solution looks great! Any idea where I would find up and back hinges and what those would look like?

Thanks

John

[z28ke]

This solution looks great! Any idea where I would find up and back hinges and what those would look like?

Thanks

John

These are the type of hinge:

Sea-Doo New OEM Sport Boat Seat Hinge Bracket Set 230 Challenger, SP, Wake https://www.amazon.com/dp/B01GVT3K4G..._SanqDb7AB02P4

But there is one major problem.... there is no cross support to mount the rearward hinge to on the max. Only solution would be to build one from hdpe.

[haknslash]

Thinking about adding RGB lighting to my Max in the off season. What controller do you guys recommend or should I just buy a roll of RGB LEDs from Amazon that come with their own controller?

[z28ke]

I used the wetsounds music controller, but I’m sure the others will work fine too.

[jcarter20]

I took a queue from you and lit up my speakers. Good tip on the led lights. The best part is the boat was pre-wired for them, so the install was super easy.




Sent from my iPhone using Tapatalk

[Simontoftesen42]

Awesome inspiring mods to those interiors of those boats. I will probably use them myself!