Tow Vehicle

[haknslash]

Pics of the new hitch and wiring adapter...

5B778B0B-5463-482E-9D66-0ABEABA0B43A.jpg

7BAE1634-E22C-4608-B7E8-B2563EA865E5.jpg

Cool. I posted this on another forum. I went this way instead. No cutting. Basically just taking off the old hitch and putting on the bumper mount with no hitch.

“2. Remove the stock bumper/hitch assembly and purchase a new assembly w/o the stock hitch (Ford p/n HL3Z17D826D) , basically taking my stock hitch off then and buy the Curt (or similar) class IV hitch and install them both. Pros being it will look and function on the truck a lot better. Cons, more $$ and more work.
“

Only cost me $158.00



Sent from my iPad using Tapatalk

I'm aware I could have bought the extra Ford bracketd but I think I can save myself the extra $158 and just cut off what I don't need and then remount the bumper. Nobody would know the wiser unless they looked under my truck and noticed the cut edge. A little black paint and primer should blend it all in. It should function the same as a truck without factory tow package.