I ended up not installed that carpeted trim piece around the storage box you see in the pic with the sub lighted up. I thought it looked much better without and it was not required now that I have attached it differently. The carpet was ordered from Overtons and it was Daystar 16oz carpet, color was midnight. It was pretty much a dead on match to the original. I am looking for a way to trim out the port, but I have found anything to suit me yet. It doesn’t look bad, but you have to be extremely patient when cutting this carpet around it. It was not meant for fine clean cuts. I did the best I could and then burnt the edges with a lighter to keep it from fraying any further. I also used 3M spray adhesive to attach the carpet to the bulkhead. I sprayed rubberized bed liner on the back of the box, where it is not Visible. I figured the less carpet in the boat the better. That was probably not required because I used all marine grade plywood, but I wanted any exposed wood to be black.


Sent from my iPhone using Tapatalk