![Moomba on Facebook Moomba on Facebook](/assets/images/chicklet_facebook.gif)
![Moomba on Twitter Moomba on Twitter](/assets/images/chicklet_twitters.gif)
![Moomba on Vimeo Moomba on Vimeo](/assets/images/chicklet_vimeo.gif)
![Moomba on Instagram Moomba on Instagram](/assets/images/chicklet_instagram.gif)
![Moomba on Blogger Moomba on Blogger](/assets/images/chicklet_blogger.gif)
So I put down my deposit for the February spray date and finally ironed out all of the details in spec'ing this beast..
Big thanks to the guys @ Rinker's Marine here in Houston, they have been awesome to work with!! Top not crew over there!
I will post any info I get as well as pictures and that fun stuff here for those that care to follow along. If you have any questions feel free to ask!
Here she is.....
![]()
2019 Makai
Raptor 450 w/ 1.76 Trans
WakeMakers 1350s in the rear & 1K in Lead
Continuing from the other thread, I'm running 20% ceramic. It looks awesome on the outside and visibility is great from inside. I'm normally on the bolster looking over the windshield but I can see perfectly with shades on when seated. I don't really boat at night so I could have gone 5% but if night boating is a regular thing for you go with 20%.
The next level lighter is 35% but that's not really worth the LOE for the amount of reflectance/refraction you get.
Sent from my Note9 using Tapatalk
2017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
2017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
Good to know on the 20% it looks awesome!!!
Thanks!! Ya Rinker’s has a Craz that has the Raspberry metal flake and the Raspberry interior accent so I was able to see it on a boat before I spec’d it and even just under the lights on the showroom floor it looked awesome! I can’t wait to see it in the sun!
Ya we can definitely find a day this summer and get out on the water! Extra lead is always welcome! Where do you typically run your boat?
2019 Makai
Raptor 450 w/ 1.76 Trans
WakeMakers 1350s in the rear & 1K in Lead
2017 Moomba Craz Surf Edition
Flow 2.0 Surf System w/ AutoWake™
5,600 Lbs Ballast - Enzos + Lead + Sumo
Wet Sounds REV10s + REVO12-XXX
Gonna be a beautiful boat, Congrats! Here's some great pics from Southtown Watersports of a similar Makai. Doesn't have your red accents on the interior (which looks awesome) but everything else is pretty close.
https://www.southtownwatersports.com...nventory-3148/
Jeff
2012 Outback V
2019 Makai
Raptor 450 w/ 1.76 Trans
WakeMakers 1350s in the rear & 1K in Lead