Results 71 to 78 of 78
Thread: Surf tab or gate?
-
05-16-2018, 03:58 AM #71
-
05-16-2018, 09:48 AM #72
What if you mocked up a system that clamped onto your swim deck and the center wake plate? Basically create a new temporary transom. Obviously don't move the wake plate once in the water, but that would give you a platform to mount a wooden tab on each side to manually adjust with a turnbuckle or even set it with a angle brace at the house and not adjust once on the water - it would at least give you an idea of how it would displace the water. Might be a lot of work to get that test up and running though...
I could draw up some concepts in CAD if you're interested. I think I have the transom of my OBV modeled already when I was designing my surf platform. Yeah I know, I'm a nerd...2008 OBV
325 EFI with closed cooling
Gravity III with 750's in the rear, 400 stock floor, 750 IBS
Servo valve ballast upgrade
Wetsounds Rev10
JL Amps, WS420BT
2000 Outback LS <-- Sold!!!
310 Carb Direct Drive
800# Rear Locker
750# IBS (should have kept this for the OBV)
Dual Batteries with 2 Bank Charger System
Kenwood Head with Remotes
Too many hours restoring exterior from prior negligence to count!
-
05-16-2018, 10:07 AM #73
Wicked wake surf out of Atlanta is/was doing the platform mount surf gates. Not sure what all brands they do. I had them on my Axis A22. You could either use the ratchet straps and turn buckles or through bolt it to the platform. You only have one on at a time.
2018 Supra SA400 aka The Ron Burgandy
2011 Sea-Doo Wake 155
2015 Mojo Surf, sold...2013 Axis A22 Recon Edition, sold...2010 Axis A22, sold...2007 Maxum 1800sr3, sold
-
05-16-2018, 12:38 PM #74
-
05-25-2018, 02:53 AM #75
So I tried this gate with the 2419 prop and it really didn't make much difference. I also made a smaller gate face, and tried it out as well.
Both gates were buried under the water at the back of the boat, so I'd have to make it taller to be more effective. I don't want it to stick up past the swim when closed, so I think a gate system is out unless I raise the swim step.
Overall, the Nauticurl made a far better wave and didn't tax the boat as much.2019 Supra SL450
-
05-25-2018, 06:55 AM #76
So the only thing left to do is drill for tabs... 🤣🤣🤣
Sent from my SM-G955U using Tapatalk2008 OBV
325 EFI with closed cooling
Gravity III with 750's in the rear, 400 stock floor, 750 IBS
Servo valve ballast upgrade
Wetsounds Rev10
JL Amps, WS420BT
2000 Outback LS <-- Sold!!!
310 Carb Direct Drive
800# Rear Locker
750# IBS (should have kept this for the OBV)
Dual Batteries with 2 Bank Charger System
Kenwood Head with Remotes
Too many hours restoring exterior from prior negligence to count!
-
05-25-2018, 09:28 AM #77
-
09-18-2018, 07:45 AM #78Junior Member
- Join Date
- Aug 2016
- Posts
- 2