OZ tower swivel screw

[Sampp1963]

Hi everyone,

I notice today that one on the screw a the swivel point of my oz tower was almost completely unscrewed... I didn't have any tools with me except a small screwdriver.... I couldn't screw it back in place. Has anyone had any issues with that? Can I just screw it back in place with a big screwdriver? Do I need to lower the tower first? Or find a way to remove some of the weight on the tower first?

Thanks image.jpg

[Badfoot]

Yes you can just screw it back in with a large screw driver. You will need someone to push up on the tower to relieve the tension and then screw it. Mine backed out twice so I used some lock-tite (non permanent type) and it has stayed in place ever since.

[Sampp1963]

Alright .... Thanks... I will try that. I'll let you know

[ghebert1111]

Well mine has done the same thing. Does this screw have threads on both ends or just one end?

[Sampp1963]

I don't Know...but I screwed it back in with a big screw driver....I'll just have to watch once in white to make sure it doesn't unscrew again

[bjrow]

Ours almost came out when we first bought it.
Used Loctite 222 on thread and screwed it back in with a little help from someone pressing up on the middle of the tower.
Used a big flatblade screwdriver, seems OK so far.
Cheers BruceR, Melb AUS.