New for 2019

[trace]

To clarify, for 2019 Moomba has 3 engine options.

On all boats, you can get the 400 Raptor. It always has the 1.5 gear ratio.

On most boats, you can get the 450 Raptor. It always has the 1.76 gear ratio.

On the Makai only, you can get the 575 Raptor. It always has the 1.5 gear ratio.

Hope that clears it up. For most people, the 400 is all you will need and you can get the best prop for your application. If you are running heavy loads ALL the time, or if you are at altitude, then the 450 with 1.76 gears is a great option. If you want the best overall power AND speed, then the 575 is available on Makai.

Matt Brown,

What are the engine/tranny options for the 2019 Supra line?

[Jon]

400 standard on SR, SA, SL

New 450 standard on SE and optional on all others.

575 optional on SA, SL, SE.

1.5 ratio on all.


Sent from my iPhone using Tapatalk

[trace]

So the Moomba gets the 1.76 ratio tranny with the 450, but not Supra. WTH are they thinking?

[larry_arizona]

Moomba >Supra lol


Sent from my iPhone using Tapatalk

[shockthis]

No way, they need to give the 450 a new tranny. If I had to look at a 19 I would only consider it if they had ditched the 1.5

[shockthis]

Could you swap out the tranny for a 1.76 ? If I could do it for a few grand I would.

[DatTexasBoy]

Could you swap out the tranny for a 1.76 ? If I could do it for a few grand I would.

I really wish I knew why they decided against 1.76 or 2 to 1 on at least the SE!

[dakota4ce]

I really wish I knew why they decided against 1.76 or 2 to 1 on at least the SE!

Shaft angles all change when they do that....I think they’re more of an engineering challenge than people appreciate?


Sent from my iPhone using Tapatalk

[DatTexasBoy]

Shaft angles all change when they do that....I think they’re more of an engineering challenge than people appreciate?


Sent from my iPhone using Tapatalk

Fair enough, I truly did not know. Thanks!

[dakota4ce]

Fair enough, I truly did not know. Thanks!

I have only ever heard that. I am not a boat shaft angle engineer as a disclaimer 🤣


Sent from my iPhone using Tapatalk